DOUBLE FACER
Structural features:
★ The surface of the heating plate is ground, the width of the hot plate is 600mm, there are 16 heating plates, and the cooling setting is 4 meters. The heating plate is made of a vessel plate, which conforms to the national first-class pressure vessel standard, with a pressure vessel certificate and inspection certificate.
★ The upper conveyer belt rectifies the right and left sides to adopt the pneumatic automatic correction deviation.
★ Heating plate heat transfer pipe temperature control sub-four-segment, with a temperature display.
★ A double cylinder S type cotton belt tensioning device is used for the upper cotton belt.
★ The lower belt adopts pneumatic tension and pneumatic correction.
★ Drive roller coated with attached wear-resistant rubber, showed a herringbone structure, With a high, ensure smooth cardboard output.
★ Main drive motor for frequency conversion motor, low-speed torque, wide speed range, reliable, and easy maintenance.
★ Hot plate internal for partition isolation structure, s-shaped flow of steam,Steam, water separation function significantly improves the utilization of steam.
Technical parameters:
| Temperature requirement |
160—200℃ |
| Steam pressure |
0.8-1.3Mpa |
| Air source pressure |
0.6—0.9Mpa |
| Cooling stereotypes length |
4m |
| Heating plate quantity |
16 pieces |
Roller diameter parameters:
| Upper drive rubber roller diameter:￠700mm |
| Lower drive rubber roller diameter:￠400mm |
| Former follower with roller diameter:￠215mm |
| Back setting belt driven roller diameter:￠215mm |
| Platen roller:￠70mm |
| Setting roller diameter:￠86mm |
| Upper belt tension roller diameter:￠155mm |
| Upper roll diameter with detuning:￠130mm |
| Entrusted with the roll diameter lower belt:￠130mm |
| Lower belt tension roll diameter: ￠130mm |
Note: All the roller surface after grinding are hard chrome plated
Powered motor parameters:
| Main drive motor power |
30Kw |
Product Tags:
|
|
Dia 400mm 700mm Roller Double Facer Corrugated Machine Images
|
